If you want to buy a replacement screen, screwdrivers and other parts, you can order from us
here -
Nokia 2630 LCD screen
Tools required for disassembly: Torx 5 screwdriver
First remove the battery cover & battery. Next remove the two screws
you see

The front cover can be removed by unclipping it starting at the
middle of the cover (where you just removed the two screws).

Your phone will now look like below. Now remove the four screws you
can see.

The LCD is held in place by a plastic frame which is held to the PCB
with clips around its edge. Unclip the frame from left to right, like
below. Don't remove it completely, but leave it attached on the right
side.

Lift the PCB from left to right at the top of the phone. Be careful
and do not remove it completely as it's held in place at the bottom of
the phone by the ringer. You just need to lift it out enough to access
the connector from the LCD screen, circled below. This connects like a
plug and socket. Simply lift it away from the PCB to unplug the
connector.

You have now removed the LCD screen. Reverse the whole procedure for
reassembly. If you've found this disassembly guide useful, please support formymobile.co.uk and order the tools and parts you need from our site. We ship worldwide!
If you have any questions about how to take apart and repair your broken Nokia 2630, email
rob.lee@formymobile.co.uk. Or post a comment below for further help with Nokia 2630 disassembly.
If you want to buy a replacement screen, screwdrivers and other parts, you can order from us
here -
Nokia 2630 LCD screen