If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=w200lcd
Tools required: Torx 6 screwdriver.
- First remove the battery cover, battery and memory card.
- The front cover can be removed by unclipping it starting at the
bottom of the phone.
- Your phone will now look like below. Now remove the four screws you
can see. Note that the black screws belong at the bottom of the phone
and the silver screws belong at the top
- The top part of the phone (PCB and LCD screen) can now be removed
from the middle chassis. Just lift if out.
- A metal frame surrounds the LCD screen. It's held on with clips
around the edge of the PCB. Unclip and remove.
- Lift the keypad part away from the phone. It'll be pretty loose and
easily removed.
- You can now remove the LCD screen. It's attached by a ribbon which
slides in and out of it's connector. Take note of how it connects before
removing it. Simply pull the screen back and it'll
unplug. You can now replace the LCD. Reverse the whole procedure for
reassembly.
If you have any questions about Sony Ericsson W200i disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with Sony Ericsson W200i disassembly.
If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=w200lcd
|
