If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=v600ilcd
Tools required: Torx 6 screwdriver.
- First remove the battery cover, battery and sim. Next remove the
screws you can see.
- Run something like the edge of a credit card along the join of the
battery compartment. It
should then come away with little force.
- Your phone should now look like below. A number of clips hold the
front cover on around its edge so release then to remove the front
cover.
- Your phone should now look like below. Lift the keypad from the
phone.
- At the point indicated by the arrow there should be a small gap
which will allow you to lever the screen. Make sure you lift from the
right side of the phone due to the position of the ribbon connector (see
the next stage).
- The ribbon connector, circled, has a black latch which you need to
flick over to release the ribbon.
- You should now have the LCD screen removed. Reverse the procedure for reassembly.
If you have any questions about Sony Ericsson V600i disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with Sony Ericsson V600i disassembly.
If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=v600ilcd
|
