If you require a replacement screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=t715lcd
Tools required for disassembly: Torx 6 screwdriver, Phillips screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery, sim and memory card. Four screws
need to be removed, circled below.
- Run something like a credit card all the way around the join of the battery
compartment to release it from the rest of the phone.
- With the battery compartment removed your phone should look like
below. Now remove the four circled screws.
- Now lift the aerial away from the phone. It will come away with
little force.
- Starting from the bottom, lift the circuit board away from the
phone. It will still be attached by a ribbon cable. To release the
ribbon, look closely at the socket, which is circled below, and you'll
see a black latch. Flick this over and you'll then be able to pull the
ribbon away from the socket.
- With the circuit board removed your phone should look like below. Now
remove the two circled screws.
- Now pull the slide and the main body of the phone away from each other. The
parts will separate without force and your phone will then look like
below.
-
Two screws are covered by a large blue sticker. To remove the sticker,
slide something like a credit card underneath and gently peel it back,
as shown below.
-
Remove the two screws circled below.
-
Run your plastic tool along the join of the front cover to release the
clips that hold it in place. Do this on both sides of the phone.
- You should now have the front cover removed.
-
Lift the keypad part up slightly to access another ribbon and connector.
-
Below is a close up shot of the ribbon and connector. Again, you release
the ribbon by flicking the black latch back.
-
Now lever the screen up from the top left or top right corner and pull
it away from the phone. The ribbon from the screen, which you opened the
latch for in the last stage, will then release.
-
You should now have the LCD screen removed. Reverse the whole procedure
for reassembly.
If you have any questions about Sony Ericsson T715 disassembly, email
rob.lee@formymobile.co.uk.
Or contact us on
Facebook
for further help with Sony Ericsson T715 disassembly.
If you require a replacement screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=t715lcd
|
