If you require a replacement screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=t650lcd
Tools required for disassembly: Torx 6 screwdriver, Phillips screwdriver.
- Before starting, remove your memory card. Now take the back cover
off, take the battery out and remove the ten screws
you see in the back of the phone.
- You
can release the back cover. Run your fingernail round the edge
of the housing then lift the cover away from the rest of the phone.
- Your phone should now be in two parts, like
below. Remove the two Phillips head screws near the bottom of the phone
- Now lift the keypad part from left to right. The keypad part is held
on by a ribbon (obscured by my thumb) which attaches like a plug and
socket. The ribbon will unplug when you lift the keypad part away.
- You should now have access to the LCD
screen. Again, it is held in place by a ribbon which attaches like a
plug and socket at the point indicated by the screwdriver in the photo
below. Lift it up and it'll unplug
- You can then remove the LCD screen and replace with new. Reverse the
whole procedure for reassembly.
If you have any questions about Sony Ericsson T650i disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with Sony Ericsson T650i disassembly.
If you require a replacement screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=t650lcd
|
