Your basket  Your basket
0 product(s) - Sub total £0.00
Checkout

Repair guides »

Sony Ericsson T303 disassembly, screen replacement and repair



If you want to buy a replacement screen, screwdrivers and other parts, you can order from us here - Sony Ericsson T303 LCD screen

Tools required for disassembly: Phillips screwdriver, plastic tool such as a credit card or guitar plectrum.

Remove your back cover, battery, sim etc. Remove the two screws you can see. Sony Ericsson T303 disassembly stage 1 Use a thin plastic tool, such as a credit card, to remove the surround for the keypad. Sony Ericsson T303 disassembly stage 2 Now lift the keypad up to reveal two more screws. Remove these screws. Sony Ericsson T303 disassembly stage 3 The part shown below will now be loose and can be removed. Sony Ericsson T303 disassembly stage 4 Lift the green circuit board to the left of the phone (it'll be held in place by a small plastic clip) and a ribbon and connector (circled in white) will disconnect. The ribbon and connector attach like a plug and socket. Now remove the screws (circled in red). Sony Ericsson T303 disassembly stage 5 The battery compartment can now be removed. It should come away with little force. Sony Ericsson T303 disassembly stage 6 Remove the sticker, as shown below, to reveal two more screws. Remove these. Sony Ericsson T303 disassembly stage 7 The slide will now move a little further down and you can access the two circled metal clips. Bend these back slightly. Sony Ericsson T303 disassembly stage 8 You can then remove the part shown below, revealing two more screws for you to remove. Sony Ericsson T303 disassembly stage 9 Run something like the edge of a credit card around the edge of the metal slide assembly and it will now come away from the phone. Note that it'll still be connected by a ribbon (circled). Again, this attaches like a plug and socket. Lever it up and it'll disconnect quite easily. Sony Ericsson T303 disassembly stage 10 Your phone should now look like below. Disconnect the ribbon circled in red. Again it attaches like a plug and socket. Lever the LCD screen out at the points shown by the arrows below. Sony Ericsson T303 disassembly stage 11 Your phone should now look like below. Disconnect the ribbon, circled. Again, it attaches like a plug and socket. Sony Ericsson T303 disassembly stage 12 Now peel the ribbon, which has the navi pad attached to the end, away from the back of the LCD. It's stuck down lightly with double sided tape. You should now have the LCD removed. Reverse the whole procedure for reassembly. If you've found this disassembly guide useful, please support formymobile.co.uk and order the tools and parts you need from our site. We ship worldwide! Sony Ericsson T303 disassembly stage 13
If you have any questions about how to take apart and repair your broken Sony Ericsson T303, email rob.lee@formymobile.co.uk. Or post a comment below for further help with Sony Ericsson T303 disassembly.

If you want to buy a replacement screen, screwdrivers and other parts, you can order from us here - Sony Ericsson T303 LCD screen