If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=t200_lcd
Tools required: Torx 6 screwdriver.
- First remove the battery cover, battery and sim card. Next remove
the four screws
you see
- Pull the two halves of the phone apart to remove the front cover.
- Your phone will now look like below. Now remove the two screws you
can see. You can then remove the circuit board from the back of the
phone
- Your phone should now look like below.
- The LCD is attached with double sided tape around the edges. Give it
a firm pull to lift it from the circuit board. Try and lift it from the
bottom edge on each side as the screen will still be attached by a
ribbon which you don't want to pull too hard as it may damage the socket
which it plugs into.
- The screen is attached to the circuit board by a ribbon. Pull this
away from the circuit board to release it, paying attention to how it
connects.
- You should now have the LCD screen removed and you can replace it
with your new LCD. Reverse the whole procedure for reassembly.
If you have any questions about Sony Ericsson T200 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
Sony Ericsson T200 disassembly.
If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=t200_lcd
|
