If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=s7220lcd
Tools required: Phillips screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery, sim and memory card. Six screws
need to be removed.

- Run something like a credit card around the join of the battery
compartment to release it from the rest of the phone.

- With the battery compartment removed your phone should look like
below. The camera and volume buttons will also come away. Two more
screws need to be removed.

- Now lift the circuit board from left to right. You'll see it is
connected by two ribbons (circled below). Each ribbon connector needs to
be disconnected. They attach like a plug and socket. Just lever
each one away from the circuit board to unplug. You can then lift the
circuit board away.

- Carefully lever the microphone (circled) out of it's slot. A number
of clips hold the front cover in place so pull the front cover around
its edge in the direction shown by the arrows to release it.

- You should now have the front cover removed. Push your screwdriver
into the point circled below. This will lift the LCD screen on the other
side and allow you to slide your credit card underneath it.

- Slide your credit card under the LCD screen to release it.

-
You should now have the LCD screen removed. Reverse the whole procedure
for reassembly.

If you have any questions about Samsung Lucido S7220 disassembly, email
rob.lee@formymobile.co.uk. The official service manual for this phone may also help you with further
Samsung Lucido S7220 disassembly. Click here for details
|
|