If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=s500lcd
Tools required: Small flat head screwdriver or similar tool
- Slide the phone open. Release the front cover cover by lifting it
up, starting where the arrow indicates, then run your fingernail along
the edge of the housing to unclip it.
- Your phone should now be in two parts, as shown below.
- Lever the LCD out of the phone with a small flat head screwdriver or
something similar. The LCD will still be attached by a ribbon (see the
next stage).
- The LCD screen is attached to the phone by a ribbon which attached
like a plug and socket. Simply lift it up to unplug it.
- You should now have the LCD screen removed and you can replace it
with your new LCD. Reverse the whole procedure for reassembly. Please
note, when you put the front cover back on, make sure you start at the
bottom, making sure the plastic lugs slot into place before pushing the
rest of the cover on.
If you have any questions about Sony Ericsson S500i disassembly, email
rob.lee@formymobile.co.uk. The official service manual for this phone may also help you with further
Sony Ericsson S500i disassembly. Click here for details
|
|
ABOUT
