Mobile phone parts and repair specialists
Your basket

Sub total: £0.00
Home     About     Contact     Delivery     FAQ     Repair guides     Security     Terms Log in/out     Register


Repair guides » Samsung S3650 Genio disassembly

If you want to buy a replacement screen, screwdrivers and other parts, you can order from us here: Samsung S3650 Genio LCD screen

Tools required for disassembly: Phillips screwdriver, plastic tool such as a guitar plectrum or credit card.

  • Remove your back cover, battery, sim and memory card. Six screws need to be removed, circled in red. Once you have removed the screws you can remove the battery compartment. To do so, pry open the clips, circled in white, then pry the battery compartment away from the rest of the phone.

Samsung S3650 Genio disassembly stage 1

  • Below you can see the battery compartment coming away from the rest of the phone.

Samsung S3650 Genio disassembly stage 2

  • With the battery compartment removed your phone should look like below. A ribbon connector (circled in blue) needs to be disconnected. It attaches like a plug and socket. Just lever this up to unplug. A second ribbon connector, circled in white, needs to be disconnected. To do so, lift the black part, which is on a hinge, up towards the ribbon. Then pull the ribbon out of the socket. The switches for the camera and volume buttons, indicated by the arrows, are stuck to the side of the phone with double sided tape. Peel each switch away from the side of the phone being careful not to damage the wire which connects each switch to the circuit board. Now remove the four screws you can see. The two at the bottom of the phone are longer than the two at the top. Remember this when you put the phone back together.

Samsung S3650 Genio disassembly stage 3

  • You can now simply lift the circuit board away from the rest of the phone, as shown below. Now pull the front cover in the direction of the arrows. This will release the grey plate which covers the back of the LCD screen.

Samsung S3650 Genio disassembly stage 4

  • With the grey plate removed your phone will look like below.

Samsung S3650 Genio disassembly stage 5

  • Now carefully slide something thin a flat, like a credit card or guitar plectrum, under the outer edge of the LCD screen. This will release the double sided tape holding it in place.

Samsung S3650 Genio disassembly stage 6

  • You should now have the LCD screen removed. Reverse the whole procedure for reassembly. If you've found this disassembly guide useful, please support us and order the tools and parts you need from our site. We ship worldwide!

Samsung S3650 Genio disassembly stage 7


If you have any questions about how to take apart and repair your broken Samsung S3650 Genio, email rob.lee@formymobile.co.uk. Or contact us on Facebook for further help with Samsung S3650 Genio disassembly.

If you want to buy a replacement screen, screwdrivers and other parts, you can order from us here: Samsung S3650 Genio LCD screen





Repair your phone with our parts, tools and guides


Home     About     Contact     Delivery     FAQ     Repair guides     Security     Terms

© Phonefinder Ltd. Registered in England & Wales, 4663875, 2003-2013. All rights reserved