If you require a replacement screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=bb8110lcd
Tools required for disassembly: Torx 6 screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery, sim and memory card. Now remove the
two screws, circled below.
- Wedge something like a credit card under the part shown, then pull it
back with your fingers and it'll pop off. It'll feel like the part is on
a spring and some force is required.
- Your phone should now look like
below.
- Turn the phone over then remove the two screws you see, circled
below.
- Run something like a credit card along each side of the phone to release the
two chrome bezels. They should come away with little force.
- Your phone should now look like below.
- The battery compartment is held on with clips along each side of the
phone. Pull these back and the battery compartment will release.
-
Your phone should now look like below.
A few clips, such as those circled, hold the front cover to the circuit
board. Gently pull these clips back to release the front cover.
-
Your phone should now look like below. Circled is the ribbon connector
from LCD screen. Remove the little white sticker then flick back the
black latch, opposite to the side the ribbon enters. Now gently pull the LCD screen away
from the circuit board.
-
You should now have the LCD screen removed. Reverse the whole
procedure for reassembly.
If you have any questions about BlackBerry Pearl 8110 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
BlackBerry Pearl 8110 disassembly.
If you require a replacement screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=bb8110lcd
|
