If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=8100lcd
Tools required: Torx 6 screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery, sim and memory card. Now remove the
two screws at the top of the phone.
- Wedge something like a credit card under the part shown, then pull it
back with your fingers and it'll pop off. Some force is required.
- Your phone should look like
below.
- Turn the phone over then remove the two screws you have access to.
- Run your plastic tool along each side of the phone to release the
two chrome bezels.
- Your phone should now look like below.
- You can now pull away the battery compartment. It should come away
with ease.
-
A few clips, such as those circled, hold the front cover to the circuit
board. Gently pull these clips back to release the front cover.
-
Your phone should now look like below. Circled is the ribbon connector
from LCD screen. Remove the little yellow sticker then flick back a
black latch to release the ribbon. Now gently pull the LCD screen away
from the circuit board.
-
You should now have the LCD screen removed. Reverse the whole
procedure for reassembly.
If you have any questions about BlackBerry Pearl 8100 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
BlackBerry Pearl 8100 disassembly.
|
|
ABOUT
