If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=i8910lcd
Tools required: Phillips screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery, sim and memory card.
- Run something like a credit card around the join of the camera cover
in order to release it.
- With the camera cover removed your phone should look like
below. Now remove the six screws you can see, circled below.
- Now wedge your plastic tool into the recess at the top of the phone,
as shown below, and lever the battery compartment. It should release
without much force.
- With the battery compartment removed your phone should look like
below. Two screws, circled at the top of the photo, need to be removed.
Two ribbon connectors, circled at the bottom of the phone, need to be
disconnected. Each attaches like a plug and socket. Just lever them up
to unplug. Now, starting near the bottom of the phone, lift the circuit
board up and gently pull it back, away from the rest of the phone.
- With the circuit board removed your phone should look like below. Note that
a ribbon and connector, circled near the top of the photo, will
disconnect when you remove the circuit board. Remember o reconnect this
when you put the phone back together. Next remove the two screws circled
at the bottom of the phone. Once you have removed the screws, lever out
the speaker module. The keypad will then become loose.
- With the speaker module and keypad removed your phone will look like
below.
-
Another ribbon needs to be disconnected. This one is different from
previous ribbons. To release the orange ribbon flick the black latch up
and pull it away from its socket. Also remove the two screws you can
see, circled below.
-
Now carefully slide you credit card all the way around the edge of the
touch screen. It's held in place with double sided tape. Do not apply
force to the touch screen as it will break.
-
With the touch screen removed your phone will look like below.
- To release the LCD screen, turn the phone over and push the orange
part. This will lift the screen out just enough for you to slide your
credit card underneath it.
-
The LCD screen is held in place with double sided tape. To remove it
carefully slide your credit card all the way under the screen, starting
from the right side (there is a ribbon on the left side which you could
damage). Do not try and force the screen or it will break.
-
You should now have the LCD screen removed. Reverse the whole procedure
for reassembly.
If you have any questions about Samsung i8910 Omnia HD disassembly, email
rob.lee@formymobile.co.uk. Or contact us on Facebook for further help with
Samsung i8910 Omnia HD disassembly.
If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=i8910lcd
|
