If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=omnialcd
Tools required: Phillips size 0 screwdriver
- Remove your back cover, battery, sim and memory card. Remove the
four
screws you can see.
- Use a thin plastic tool, such as a credit card, to separate the
front and back cover. Slide your tool all the way around the edge of the
join to release them.
- The back cover should now be removed, like below. You now need to
detach three connectors (circled). The small gold connector on the left
with the thin wire leading from it needs carefully levering off. The
connector far right has a black hinge which needs flicking up and the
other connector attaches like a plug and socket so simply lift this up
to unplug it. Now unscrew the two screws you see.
- The picture below shows the phone after the connectors have been
released and the two screws have been removed.
- Flip the circuit board over. There are two more connectors, circled,
which need to be released. Again, one has a hinge and the other attaches
like a plug and socket.
- You should now have the circuit board removed, like below.
- Peel back the sticker, as shown below.
-
Your phone should now look like below.
-
Lift the camera assembly from right to left. Be careful not to damage
the thin wire on the left when you remove it.
-
Your phone should now look like below. Now remove the two screws you can
see.
- The front bezel will now be loose. Lift it away starting at the
bottom of the phone.
-
Your phone should now look like below.
-
Now remove the keypad membrane. It will be stuck down with double sided
tape at each end.
-
Slide your credit card around the edge of the screen to release it.
It'll be stuck down with double sided tape.
-
Your phone should now look like below. Now slide your credit card
between the touch screen (digitizer) and LCD screen.
-
You should now have the LCD removed. Reverse the whole procedure for reassembly.
If you have any questions about Samsung Omnia i900 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
Samsung Omnia i900 disassembly.
|
|
ABOUT
