If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=n96lcd2
Tools required: Torx 6 screwdriver, plastic tool such as a credit card or guitar plectrum.
- First remove the battery cover, battery, sim and memory card.
- Push the slide up and remove the two screws you can see (circled).
- Push the slide down and remove the two other circled screws.
- Starting at the top of the phone, pull the front cover away from the
phone. Once you have the front cover released as far as shown below,
push the centre navigation button through the front cover (indicated by
the arrow) as you pull the cover away from the phone completely. This
will release the cover at the bottom of the phone. Note that when you
put the front cover back on, start at the bottom.
- You should now have the front cover removed. Circled below is a
ribbon connector. This
attaches like a plug and socket. Just lever this up to unplug it.
- Now slide your plastic tool under the LCD screen to release it.
- You should now have the LCD screen removed. Reverse the whole
procedure for reassembly.
If you have any questions about Nokia N96 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with Nokia N96 disassembly.
If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=n96lcd2
|
