If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=n81lcd
Tools required: Torx 6 screwdriver.
- Using a plastic shim, such as a guitar plectrum or credit card, lift
the top keypad away from the phone.
- You should now have the top keypad removed, like below.
- Run your fingernail, or plastic shim, to unclip the bottom keypad
surround. You can then remove the keypad.
- You should now have the keypad removed, like below. Now remove the
four screws you can see.
- Use your plastic shim to lift the display window away from the rest
of the phone. It is held in place by a light adhesive so will require
some force.
- The display window should now be removed.
- Carefully lift the edge of the top keypad part. This is held down
with adhesive. Once you have a corner lifted up, peel this part back
carefully.
- You now have access to the LCD ribbon connector, circled below. This
attaches like a plug and socket. Simply pull the connector away from
its socket to unplug it.
- Lift the screen away from the rest of the phone. Your phone should
now look like below and you can replace the LCD.
Reverse the whole procedure for reassembly.
If you have any questions about Nokia N81 8GB disassembly, email
rob.lee@formymobile.co.uk.
Or contact us on Facebook for help with
further Nokia N81 8GB disassembly.
If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=n81lcd
|
