If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=n75lcd
Tools required: Torx 6 screwdriver
- Run your fingernail or the edge of a credit card around the join of
the top half of the phone to release the clips which hold the front
cover on.
- You now have the front cover removed. Now remove the 4 screws you
can see.
- In the image below, the screwdriver indicates a ribbon connector
which you need to disconnect. It attaches like a plug and socket so
simply lift it up to unplug it. Now remove the metal frame. It is
attached around the sides by four clips. Use your fingernail or a thin
sliver of metal to unclip the frame.
- You can now replace the small LCD screen. Carefully push it away
from the metal frame.
- You have now removed the small LCD.
- To remove the large LCD, detach the ribbon connector, indicated by
the screwdriver in the picture below. Again, it attaches like a plug and
socket so just lift it up to unplug.
- Lift the printed circuit board up and you can then lift the LCD
screen away from the phone.
- You will now have removed the LCD screen. Reverse the whole
procedure for reassembly.
If you have any questions about Nokia N75 disassembly, email
rob.lee@formymobile.co.uk.
The official service manual for this phone may also help you with
further Nokia N75 disassembly. Click here for details
|
|
ABOUT
