If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=n70lcd
Tools required: Torx 6 screwdriver, plastic tool such as a credit card or guitar plectrum.
- First remove the battery cover, battery, sim and memory card.
- Run your plastic tool around the join of the front cover to unclip it.
- With the front cover removed your phone will now look like
below.
- Turn your phone over and push your screwdriver in the gap, as shown
below. Do the same on the right side too. This will release the camera
surround.
- Your phone should now look like below.
- Turn the phone over and remove the six screws you can see.
- Lift the frame which holds the screen in place away from the rest of
the phone slightly. You now have access to a ribbon connector (indicated
by the arrow) that needs to be detached. The connector attaches like a
plug and socket. Lift the connector away from the phone to unplug it.
- Your phone should now look like below. Four clips hold the LCD
screen in place. Bend these back a little to release the screen.
- You should now have the LCD screen removed. Reverse the procedure for reassembly.
If you have any questions about Nokia N70 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with Nokia N70 disassembly.
If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=n70lcd
|
