If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=motow220lcd
Tools required: Torx 5 screwdriver
- Two plastic stickers cover the first two screws you need to remove.
In the photo below you can see the screws after the two plastic stickers
have been removed.
- Remove the two screws then peel away the Motorola badge at the top
of the phone. It's stuck on with double sided tape. Remove the two
screws you can now see.
- Starting near the hinge, run your fingernail all the way round the
join of the housing.
- You should now have the top half of the housing removed, allowing
access to the LCD screen.
- Detach the ribbon cable from the screen. Simply pull it and it'll
slide out of it's socket.
- You can now lift the LCD screen from the phone and replace with new.
Reverse the whole procedure for reassembly.
If you have any questions about Motorola W220 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
Motorola W220 disassembly.
|
|
ABOUT
