If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=ks360lcd
Tools required: Phillips screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery, sim and memory card. Remove the five
screws you can see.
- Slide something like a credit card in-between the housing and
battery compartment, as shown below. This will release the back part of
the phone.
- With the back of the housing removed, your phone should look like
below.
- Lift the circuit board up at the bottom, then flip it over from left
to right.
- The circled connector needs to be disconnected. It attaches like a
plug and socket. Just lever it away from the circuit board
to unplug.
- You can now lift the circuit board away from the rest of the phone,
as shown below. Remove the four screws you now have access to and you'll
be able to lift another layer of the housing away.
- Your phone should now look like below. Six screws need to be
removed. Three of these screws will be covered with small blue stickers.
Just lift them off with your screwdriver. They're not needed so don't
worry about damaging them.
-
Now slide your plastic tool all the way around the join of the front
cover to release it.
-
Your phone should now look like below. Two connectors need to be
disconnected. Again, these attach like a plug and socket. Just lever
each one up
to unplug.
-
Flip the keypad membrane up and then slide your plastic tool under the
LCD screen. It will be stuck down lightly.
- You should now have the LCD screen removed. Peel off the green
sticker, indicated by the arrow. Another ribbon needs to be
disconnected. Release this by flicking the brown latch back and then pull the screen away from the green
circuit board.
-
You should now have the LCD screen removed completely. Reverse the whole procedure for reassembly.
If you have any questions about LG KS360 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
LG KS360 disassembly.
If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=ks360lcd
|
