If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=kp501lcd
Tools required: Phillips screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery, sim and memory card. Now remove the four screws
circled in red.
- Now run your plastic tool around the join of the back cover in order
to release it.
- Your phone should now look like below. Remove the two screws circled
in red. Five ribbon connectors need to be detached (circled in blue).
Each attaches like a plug and socket. Just lever each one up to unplug.
- Now lift the aerial away from the phone, as shown below.
- Pull the circuit board away from the phone, as shown below. Another
ribbon connector needs to be detached (circled). Again, this attaches
like a plug and socket. Just lever it away from the circuit board to
unplug.
- You should now have the circuit board removed. Now remove the
camera, circled below. It's stuck down lightly with double sided tape.
- You should now have the camera removed. The ribbon circled in blue
will pull through a gap in the housing when you remove the front cover
in the next stage. Just make sure it isn't damaged as you take the front
cover off.
-
Run your plastic tool around the join of the front cover in order to
remove it.
-
Your phone should now look like below. Lever the screen out from the
points circled below.
-
You should now have the LCD screen removed. Reverse the whole procedure
for reassembly.
If you have any questions about LG Cookie KP501 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
LG Cookie KP501 disassembly.
If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=kp501lcd
|
