If you require a replacement screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=kp500lcd
Tools required for disassembly: Phillips screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery, sim, memory card and stylus. Four screws
need to be removed (circled).
- Run something like a credit card around the join of the back cover to release it from the rest of the phone.
- With the back cover removed your phone should look like
below. Five ribbon connectors (circled) need to be disconnected. Each
one attaches like a plug and socket. Just lever them up to unplug.
- With the ribbons disconnected you should be able to pull the circuit
board away, as shown below. Another connector needs to be detached in
the same way as the others.
- Your phone should now look like below. Remove the two circled screws
which hold the antenna in place. The camera, indicated by the arrow, is
stuck down with double sided tape and will come away with a little
force. The antenna will also come away with a little force.
- Your phone should now look like below.
- Run your plastic tool around the join of the front cover and lever
it off.
-
Your phone should now look like below. Lever the LCD screen out with
your plastic tool. It should come away easily.
-
You should now have the small LCD screen removed. Reverse the whole
procedure for reassembly.
If you have any questions about LG Cookie KP500 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
LG Cookie KP500 disassembly.
If you require a replacement screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=kp500lcd
|
