If you require a replacement screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=kp130lcd
Tools required for disassembly: Phillips screwdriver, plastic tool such as a guitar
plectrum or credit card.
- First remove your back cover, battery and sim.
Then remove the six screws you can see, circled below.
- Run something thin and flat around the join of the front cover, like below, in order to free this part.
Use something that won't scratch the phone, like a guitar plectrum or
credit card.
- With the front cover removed your phone should look like below.
- The circuit board will be loose and can be lifted away from the body
of the phone, as shown below.
- Turn the circuit board over and you'll see the ribbon cable from the
LCD screen. This is connected via a zif connector. The black part is a
latch that opens and closes on a hinge. Carefully lift it up, towards
the ribbon cable, and the ribbon will be free. Refer to the next two
stages to see a close up of the latch in the open and closed positions.
- Below you can see the black latch, indicated by the arrow, in the
closed position.
- Below you can see the black latch, indicated by the arrow, in the
open position.
-
Turn the phone over and to the top right of the LCD screen you'll see a
recess which you can use as a levering point to release the screen. Once
the screen is free from the circuit board, carefully pull it down and
the ribbon cable on the other side will come free and slide through a
hole in the circuit board.
-
You should now have the LCD screen removed. Reverse the whole procedure
for reassembly.
If you have any questions about LG KP130 disassembly, email
rob.lee@formymobile.co.uk. Or contact us on Facebook for further help with
LG KP130 disassembly.
If you require a replacement screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=kp130lcd
|
