If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=kf750lcd
Tools required: Phillips screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery, sim and memory card. Now remove the
six black screws you can see.

- Open the slide and remove the two silver screws you can see, circled
below.

- Run a plastic tool such as a guitar plectrum or the edge or a credit
card around the join of the back part of the phone in order to release
it.

- Your phone should now look like below. Two wires need disconnecting
(circled). Each attaches like a plug and socket. Lift the connector up
away from the phone to unplug.

- Lift the circuit board from right to left. Another connector
(circled) may disconnect as you do this. If not, disconnect it. The
circuit board will still be attached to the phone on the left by the
volume button strip. This is lightly stuck down and will peel away from
the phone.

- Your phone should now look like below. Two stickers cover two more
silver screws. Remove the stickers, circled, then remove the two screws.

- You can now remove the metal plate you have just unscrewed. Move it
around a little until it releases. Now slide the ribbon through the gap
in the slide mechanism.

- Your phone should now look like below. Remove the yellow tape which
covers the circled connector on the right. Flick the black hinge up to
release the ribbon. The connector on the left attaches like a plug and
socket, like the others.

-
Now carefully peel back the ribbon which is stuck to the back of the LCD
screen. You can now lever the screen out (start near the bottom).

-
You should now have the LCD screen removed. Reverse the whole procedure for reassembly.

If you have any questions about LG KF750 Secret disassembly, email
rob.lee@formymobile.co.uk.
Or contact us on Facebook for help with
further LG KF750 Secret disassembly.
|
|