If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=kf700lcd
Tools required: Phillips screwdriver
- Remove your back cover, battery, sim and memory card. At the top of
the phone you'll see two little plastic plugs. Lift these out two reveal
two screws. Remove these two screws plus the other four you can see.
- Starting near the bottom of the phone, run your fingernail, or
something like a guitar plectrum, all the way around the join of the
battery compartment to unclip it.
- Your phone should now look like below.
- You now need to detach a ribbon connector, indicated by the
screwdriver below. It attaches like a plug and socket. Simply lift it up
to unplug it. There is also a small connector circled in pink. Be
careful with this as the wire it's attached to is quite delicate. Lift
the gold, metal part up to disconnect it.
- Pull the printed circuit board back to reveal another ribbon. It
attaches like a plug and socket. Simply lift it up to unplug it.
- Your phone should now look like below. Remove the three screws you
see and detach the connector, which is circled in pink.
- Lift the printed circuit board from the bottom of the phone. It's
still attached near to top by a silver metal sticker on each side.
Carefully peel these stickers back.
-
Your phone should now look like below. You now have access to two
more screws. Remove these.
-
Lift the part shown below away from the phone. You now have access to
four more screws. Remove these.
-
Starting at the bottom (where the silver screws were), separate the two
parts of the phone. A little force is required near the other end.
- Your phone should look like below. Unplug the ribbon connector you
can see (circled).
-
As you now try to lift the LCD away you'll notice the the ribbons behind
it are glued down. Carefully peel them all away from the LCD.
-
You should now have the LCD removed. Reverse the whole procedure for reassembly.
If you have any questions about LG KF700 Virgo disassembly, email
rob.lee@formymobile.co.uk.
Or contact us on Facebook for help with
further LG KF700 Virgo disassembly.
|
|
ABOUT
