If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=k608lcd
Tools required: Torx 6 screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery and sim. Four screws need to be
removed, circled below.
- Run something like a credit card around the join of the battery
compartment to release it from the rest of the phone.
- With the battery compartment removed your phone should look like
below. Next lift the circuit board away from the front cover. It should
come away with little force.
- Your phone should now look like below.
- A small recess, circled below, allows you to lever the LCD screen
out.
- The LCD screen will still be connected by a ribbon cable. Remove the
small piece of sticky tape which covers the connector, circled below.
- Below is a close up of the connector. The connector has a black
hinge which needs to be lifted up where the ribbon enters its socket.
Then simply pull the ribbon away from its socket.
-
You should now have the LCD removed. Reverse the whole procedure for
reassembly.
If you have any questions about Sony Ericsson K608i disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
Sony Ericsson K608i disassembly.
|
|
ABOUT
