If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=g502lcd
Tools required: Torx 6 screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery, sim and memory card. Two screws
need to be removed, circled below.
- Run something like a credit card around the join of the camera cover to release it from the rest of the phone.
- With the camera cover removed your phone should look like below.
Next remove the two circled screws.
- Run your plastic tool around the join of the front cover to release
it.
- Your phone should now look like below. You should be able to lift
the screen and circuit board away from the back part of the phone with a
little manipulation.
- Your phone should now look like below.
- Turn the circuit board over, like below. A ribbon connector
(circled) needs to be disconnected. It attaches like a plug and socket.
Just lever this up to unplug.
-
You can now lift the LCD frame away, like below.
-
Lift the screen to one side and you'll see another ribbon which needs
disconnecting. Again, this attaches like a plug and socket. Just lever
it up to unplug.
-
You now have the LCD screen removed. Reverse the whole procedure for
reassembly.
If you have any questions about Sony Ericsson G502 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
Sony Ericsson G502 disassembly.
|
|
ABOUT
