If you require a replacement screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=e90lcd2
Tools required for disassembly: Torx 5 screwdriver.
- First remove the sticker in the large circle to reveal a screw. Then
remove all three screws you can see. The front cover will now be loose
and can be removed.
- With the front cover removed you have access to the outer LCD
screen. This is attached to the phone by a connector, which is circled.
This connector attaches like a plug and socket. Simply lift it up, away
from the phone, to disconnect it. Remove the keypad, which will be
loose.
- Your phone will now look like
below. The circled connector is attached like the last one. Disconnect
this.
- Remove the two screws, circled.
- Now lift the metal plate you have just removed the screws from to
access the LCD screen. The LCD screen will be loose and can be lifted
out.
- You should now have the inner LCD screen removed. Reverse the whole
procedure for reassembly.
If you have any questions about Nokia E90 Communicator disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with Nokia E90 Communicator disassembly.
If you require a replacement screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=e90lcd2
|
