If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=e71lcd
Tools required: Torx 5 screwdriver, torx 6 screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery, sim and memory card. Remove the four
screws you can see. Then push your screwdriver into the four circled
gaps. This releases the clips that hold the front cover in place. Now
pull the front cover away from the phone.
- With the front cover removed, your phone should look like below. The
circled connector needs to be disconnected. It attaches like a plug and
socket. Just lever it up to unplug. Now remove the two black screws you
can see at the top of the phone.
- Run your plastic tool around the join at the bottom of the phone to
remove the bottom cover, as shown below.
- Now pull the screen and frame towards you. It'll still be connected
at the bottom by a ribbon/connector so don't try and remove it
completely.
- Your phone should now look like below. The circled connector needs
to be disconnected. It attaches like a plug and socket. Just lever it up
to unplug.
- Your phone should now look like below. Pull the metal frame back at
the point indicated by the arrow and then slide your plastic tool under
the LCD screen to release it.
- You should now have the LCD screen removed. Reverse the whole procedure for reassembly.
If you have any questions about Nokia E71 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
Nokia E71 disassembly.
|
|
ABOUT
