If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=e590lcd
Tools required: Phillips screwdriver
- First remove the battery cover & battery.
Remove the four screws you see. Note that the silver screw goes in the
bottom right slot
- Run a plastic shim like a guitar plectrum or credit card all the way
around the camera surround to unclip it, allowing its removal.
- Your phone will now look like below. Now remove the two screws you
can see at the top of the phone.
- Run your fingernail around the join of the front cover to loosen
this part. Don't try and pull the front cover off though (see the next
stage)
- The front cover will still be attached by two wires connected to the
speaker at the top of the phone so just lift to cover like below rather
than trying to remove it completely.
- You can now lift the screen. It's attached by a series of spot
solder so you will need to solder your new screen on. Reverse the whole
procedure for reassembly.
If you have any questions about Samsung E590 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with Samsung E590 disassembly.
|
|
