If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=vulcd
Tools required: Phillips screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery, sim and memory card. Four screws
need to be removed, circled below.
- Run something like a credit card around the join of the camera
surround to release it.
- With the camera surround removed you phone should look like below.
- Now pull the antenna out and remove the three screws, circled in
red. Next, three ribbon connectors (circled left in blue) need to be
disconnected. Each
attaches like a plug and socket and can be levered up, away from the circuit
board. A fourth connector (circled in blue, top centre) connects in a
slightly different way to previous ribbons. Look at socket where the
ribbons enters. One part is black and one part is white. The black part
is a latch. Flick the black latch up and the ribbon will then be loose
and can be pulled away from the socket. The other two connectors, circled in blue, can be levered off in a similar way to the first three.
- With all the ribbons disconnected, your phone should look like
below.
- You can now lift the green circuit board away from the phone, as
shown below.
- Run something like a credit card around the join of the front cover
in order to release it.
-
With the front cover removed your phone should look like below.
-
There is a small piece of double sided tape on the back of the screen
so, using a little force, slide your credit card all the way under the
screen in order to release it.
-
You should now have the LCD screen removed. Reverse the whole procedure
for reassembly.
If you have any questions about LG Vu CU920 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
LG Vu CU920 disassembly.
|
|
ABOUT
