If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=c905lcd
Tools required: Phillips size 0 screwdriver, plastic tool such as a
guitar plectrum or credit card.
- Remove your back cover, battery, sim and memory card.
- Remove the sticker at the top of the phone, as shown below, and then
the two screws underneath. Next, push your screwdriver into the two
holes, circled. This will release the keypad on the other side.
- You should now have the keypad removed. Two plastic covers will also
come away. These simply push back in place before the keypad goes back
on.
- Open the slide just slightly, as shown below, and you'll then be
able to access a screw in each hole (circled). Remove these screws.
- Run your plastic tool around the join of the front cover to release
it.
- You should now have the front cover removed. Release the three clips
which hold the keypad membrane in place.
- You'll now have access to a ribbon connector, circled. This attaches
like a plug and socket. Simply pull it away from it's socket to unplug
it.
-
Lever the screen out from the point indicated below (use your plastic
tool to do this).
-
You should now have the LCD removed. Reverse the whole procedure for reassembly.
If you have any questions about Sony Ericsson C905 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
Sony Ericsson C905 disassembly.
|
|
ABOUT
