If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=8800lcd2
Tools required: Torx 5 screwdriver, plastic tool such as a credit card or guitar plectrum
- First remove the battery cover, battery, sim and memory card. Remove
the four screws you can see.
- Run something like the edge of a credit card along the join of the
bezels on each side of the phone. A little force is required.
- Your phone should now look like below.
- Starting at the bottom of the phone, separate the battery
compartment from the rest of the phone. It may need to be levered off
near the top of the phone. Just slide your credit card underneath to
release the battery compartment.
- Your phone should now look like below. Remove the two screws you can
see (circled).
- A connector (circled) attaches the LCD screen to the circuit board
of the phone. This attaches like a
plug and socket. Simply lift the ribbon connector up, away from the
phone to detach it. Lever the LCD from the point shown by the arrow to
remove it.
- The LCD should now be loose and can be removed. Reverse the whole
procedure for reassembly.
If you have any questions about BlackBerry 8800 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with BlackBerry 8800 disassembly.
|
|
ABOUT
