Sony Ericsson W950i disassembly



If you require a new screen, phone cover and screwdrivers, they can be purchased here: http://www.formymobile.co.uk/proddetail.php?prod=w950lcd


Tools required: Torx 6 screwdriver, Phillips size 0 screwdriver
  • After removing your back cover, stylus and battery, remove the two torx screws you see at the bottom of the phone. Then remove the crosshead screw which holds the antenna cover in place.

Sony Ericsson W950i disassembly stage 1

  • Run your fingernail all the way around the edge of antenna cover to remove it. Remove the two torx screws you now see at the top of the phone

Sony Ericsson W950i disassembly stage 2

  • Now run your fingernail all the way around the edge of front cover to remove it

Sony Ericsson W950i disassembly stage 3

  • Now remove the two crosshead screws from the metal plate which covers the ribbon from the LCD screen

Sony Ericsson W950i disassembly stage 4

  • Now disconnect the ribbon simply by lifting it upwards (it attaches like a plug and socket)

Sony Ericsson W950i disassembly stage 5

  • You can now remove the screen and replace with new

Sony Ericsson W950i disassembly stage 6

  • Reverse the whole procedure for reassembly
     

If you have any questions about Sony Ericsson W950i disassembly, email rob.lee@formymobile.co.uk. The official service manual for this phone may also help you with further Sony Ericsson W950i disassembly. Click here for details