Sony Ericsson W660i disassembly

If you require a new screen, phone cover and screwdrivers, they can be purchased here: http://www.formymobile.co.uk/proddetail.php?prod=w660lcd

Tools required: Torx 6 screwdriver


1) Remove the back cover, battery and two screws you can see




2) Lift the aerial cover away from the phone. This requires a little force




3) Your phone will now be in two parts, like below. Remove the two screws you now have access to at the top of the phone




4) Now run your fingernail all the way round the edge of the front cover to release it




5) You've now removed the front cover. The circuit board, which the screen is attached to, is held in place by clips all the way round the edge of the phone's chassis. You need to try and unclip these and lift the circuit board away from the chassis at the same time




6) Lift the circuit board away from the phone and you'll be able to unclip the LCD frame (the black part) from the circuit board




7) The LCD screen is now released and can be replaced. Reverse the whole procedure for reassembly




8) Replace the LCD and reverse the whole procedure for reassembly



If you have any questions about Sony Ericsson W660i disassembly, please email rob.lee@formymobile.co.uk. The official service manual for this phone may also help you with further Sony Ericsson W660i disassembly. Click here for details