Sony Ericsson W610i disassembly



If you require a new screen, phone cover and screwdrivers, they can be purchased here: http://www.formymobile.co.uk/proddetail.php?prod=w610lcd

Tools required:
Torx 6 screwdriver


1) Remove the back cover, battery and two screws you can see

Sony Ericsson W610i disassembly stage 1


2) Lift the aerial cover away from the phone by pushing it in the direction of the arrows. Remove the two screws you see

Sony Ericsson W610i disassembly stage 2


3) You can now remove the front cover. Run your fingernail along the edge of the cover to unclip it from the rest of the phone

Sony Ericsson W610i disassembly stage 3


4) Your phone should now be in two parts, like below

Sony Ericsson W610i disassembly stage 4


5) Lift the circuit board away from the chassis. It's held in place by clips around the edge of the chassis

Sony Ericsson W610i disassembly stage 5


6) Lift the LCD board away from the circuit board. It's held in place by clips around its edge. Note that the screen was also attached by two ribbons at the back which attach to the circuit board, circled below

Sony Ericsson W610i disassembly stage 6


7) The LCD screen will now pop out and can be replaced. Reverse the whole procedure for reassembly

Sony Ericsson W610i disassembly stage 7



If you have any questions about Sony Ericsson W610i disassembly, please email rob.lee@formymobile.co.uk. The official service manual for this phone may also help you with further Sony Ericsson W610i disassembly. Click here for details