Sony Ericsson M600i disassembly



If you require a new screen, phone cover and screwdrivers, they can be purchased here: http://www.formymobile.co.uk/proddetail.php?prod=m600lcd


Tools required: Torx 6 screwdriver, size 0 Phillips screwdriver, plastic shim (e.g. credit card or plectrum)
  • Remove the battery, sim card, memory card and stylus

Sony Ericsson M600i disassembly stage 1

  • Remove the cross head screws you see

Sony Ericsson M600i disassembly stage 2

  • With a plastic shim lever the antenna cover off. It is important that the cover is lifted upward. Gentle force is required here. Note from the next picture where the clips attach

Sony Ericsson M600i disassembly stage 3

  • The aerial cover is now removed. Remove the two torx screws you see

Sony Ericsson M600i disassembly stage 4

  • To remove the front cover run your fingernail along the edge of the housing where the main body of the phone and front cover meet. This will release the clips which hold the front cover in place

Sony Ericsson M600i disassembly stage 5

  • Under the keypad is a metal plate, which is fastened by two screws. Unscrew these and remove the metal plate

Sony Ericsson M600i disassembly stage 6

  • The screen can now be removed and the phone will look like the picture below. The screen is attached to the circuit board by the ribbon which connects like a plug and socket. Simply lift the ribbon and it'll pop out of the socket

Sony Ericsson M600i disassembly stage 7

  • Reverse the whole procedure for reassembly
     

If you have any questions about Sony Ericsson M600i disassembly, email rob.lee@formymobile.co.uk. The official service manual for this phone may also help you with further Sony Ericsson M600i disassembly. Click here for details