If you require a new screen, phone cover and screwdrivers, they can be purchased here: http://www.formymobile.co.uk/proddetail.php?prod=k800lcd

Tools required: Torx 6 screwdriver, Size 0 Phillips screwdriver

• Remove the two screws at the bottom of the phone with the torx 6 screwdriver. Remove the other two screws with the Phillips screwdriver

• Lift the antenna cover away from the phone. It unclips at the top of the phone and needs a little force to remove

• Remove the two torx 6 screws at the top of the phone which are revealed after removing the antenna cover

• Pull the front cover away at each side so that it releases

• The phone will now be in two parts, as below

• Wiggle and pull the keypad assembly up, away from the phone and it will pop off

• The screen assembly is held on by two clips at each side of the phone, indicated below. Unclip them to remove the screen assembly

• Unclip the ribbon which hold the screen assembly to the circuit board of the phone. It attaches like a plug and socket
   

• Detach the retaining clips on each side of the screen assembly

• Remove the faulty screen and replace with the new screen

• Reverse the whole procedure for reassembly
   

If you have any questions about Sony Ericsson K800i disassembly, email rob.lee@formymobile.co.uk. The official service manual for this phone may also help you with further Sony Ericsson K800i disassembly. Click here for details