If you require a new screen, phone cover and screwdrivers, they can be purchased here: http://www.formymobile.co.uk/proddetail.php?prod=k610ilcd

Tools required: Torx 6 screwdriver

• Remove back cover and battery. You'll now have access to two torx 6 screws. Remove these

• To remove the aerial cover push the torx 6 screwdriver into the recess at the angle shown. Some force is required to make the aerial cover unclip

• Now remove the two torx screws you have access to at the top of the phone

• Run your fingernail along the edge of the housing to unclip the front cover

• Now remove the main part of the phone from the chassis

• Unclip the ribbon circled below. It attaches like a plug and socket so just lift it and it'll unclip.

• Unclip the metal plate at both sides

• Unclip the ribbon, circled below

• Lever the LCD out, replace with the new LCD and reverse the procedure for reassembly

If you have any questions about Sony Ericsson K610i disassembly, email rob.lee@formymobile.co.uk. The official service manual for this phone may also help you with further Sony Ericsson K610i disassembly. Click here for details