If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=7610slcd2
Tools required: Torx 6 screwdriver, plastic tool such as a credit card or guitar plectrum.
- First remove the battery cover, battery, sim etc. Remove the six screws you can see.
Note that the two screws at the bottom of the phone are longer than the
other four so make sure they go back in the right place.
- Run your plastic tool around the join of the battery compartment to unclip it.
- With the battery compartment removed your phone will now look like
below. You now have access to a ribbon connector. The connector attaches like a
plug and socket. Lift the connector up, away from the phone to unplug
it. The green circuit board will now be loose and can be lifted away.
- Run your credit card around the join of the front cover then push in
the direction shown by the arrows. This will release the front cover.
- Your phone should now look like below. You now have access to another ribbon connector. The connector attaches like a
plug and socket. Lift the connector away from the phone to unplug it.
The LCD screen will now be free.
- You should now have the LCD screen removed. Reverse the procedure for reassembly.
If you have any questions about Nokia 7610 Supernova disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with Nokia 7610 Supernova disassembly.
If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=7610slcd2
|
