If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=7510slcd
Tools required: Torx 4 screwdriver, screwdriver with a very small,
flat head, or something similar.
- Remove your back cover, battery, sim and memory card. Push a very
small flat head screwdriver or something similar into the join of the housing at the
point shown and lever the screwdriver to lift the lens up.
- With the lens slightly raised you can slide a credit card around its
edge in order to release the lens.
- With the lens removed your phone should look like below. Remove the
four torx screws you can see.
- Now turn the phone over and push the cover in the direction shown by
the arrows. The cover should come away with little force.
- With the cover remove your phone should look like below.
- Turn the phone on its side. On each side you'll see three clips
which you need to release. Just lever them away with you small, flat
head screwdriver or similar. This will release the LCD frame.
- With the LCD frame removed your phone should look like below. A
ribbon connector (circled) needs to be disconnected. It attaches like a
plug and socket. Just lever this up to unplug. The screen will now be
loose and can be removed.
-
With the LCD screen removed your phone should look like below. Reverse
the whole procedure for reassembly.
If you have any questions about Nokia 7510 Supernova disassembly, email
rob.lee@formymobile.co.uk. Or contact us on Facebook for further help with
Nokia 7510 Supernova disassembly.
If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=7510slcd
|
