If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=6600foldlcd
Tools required: Torx 2 screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery, sim and memory card. Remove the two
screws you can see.
- The camera cover will now be loose and can be lifted away from the
phone, as shown below. The circled connector needs to be disconnected.
It attaches like a plug and socket. Just lever it up to unplug.
- The image below shows the connector after it has been disconnected.
- Slide your plastic tool around the join of the front cover. Start on
one corner, as shown below, then do the same on the opposite corner.
- Your phone should now look like below.
- Now open the flip and the phone will separate into two halves, as
shown below. Pull the metal bar in the direction shown.
- Your phone should now look like below.
-
(Have a look at the image in the next stage before proceeding in order
to understand what you're trying to achieve in this stage). Turn the top
half of the phone over and it'll look like below. There is a gap at the
top of the phone (circled top left) that the ribbon needs to be slid
through. Lever the ringer (circled bottom right) away from the phone.
It'll be stuck down with double sided tape. Then pull the ribbon in the
direction shown by the arrow. A connector will release. This connector
slides in and out of its socket, unlike the previous connector.
-
Your phone should now look like below.
-
Now slide your plastic tool under the edge of the display window to
release it This part is stuck down lightly with double sided tape.
- Your phone should now look like below.
-
Now lever the part shown below. Hold your finger over it as you do so to
stop it shooting off somewhere and getting lost.
-
You can now replace the LCD screen (the screen cannot be removed from
the housing so you need to replace the whole part. This can be bought
from the link at the top of this page). Reverse the whole procedure for reassembly.
If you have any questions about Nokia 6600 Fold disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
Nokia 6600 Fold disassembly.
If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=6600foldlcd
|
