If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=6500slidelcd
Tools required: Torx 5 screwdriver
- First remove the battery cover & battery.
Remove the four screws you see in the battery compartment.
- Run your fingernail around the join of each side of the slide and
it'll release slightly.
- Now use something like a credit card to lift the keypad up.
- The front part of the phone will still be connected by a ribbon
which attaches like a plug and socket. Use your credit card to lever it
off. You'll now be able to lift the top part away from the rest of the
phone.
- With the two parts separated your phone will
look like the picture below.
- Turn the top half of the phone over. Pull the keypad part away from
the rest of the phone. It's held in place with double sided tape. You'll
then have two parts like below. Remove the two screws at the top of the
phone
- Now push the slider back up and you'll be able to remove two screws
at the bottom of the phone.
-
You can now remove the metal plate, as shown below.
-
The LCD screen will now only be attached by a ribbon. The ribbon
attaches like a plug and socket. Just lift it up to unplug it.
- Lift the screen towards you as shown below. The big ribbon on the
back of the screen is held on with double sided tape. Just peel it away
so the screen is freed.
- You have now removed the LCD screen. Reverse the whole procedure for
reassembly.
If you have any questions about Nokia 6500 slide disassembly, email
rob.lee@formymobile.co.uk. The official service manual for this phone may also help you with further Nokia 6500 Slide disassembly. Click here for details
|
|