If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=6500lcd
Tools required: Torx 5 screwdriver & small flat head screwdriver or
some kind of metal lever
- First remove the battery cover, battery and memory card.
- Run your fingernail around the edge of the join of the top cover to
unclip it then remove this part.
- Now remove the camera window. It'll be stuck down with double sided
tape so just peel it away. Your phone should now look like below
- Push the front cover up the remove it. It'll just slide off.
- Your phone will now look like below.
- Use a metal lever like a flat head screwdriver to pop the LCD frame
out. Use the lever on both sides of the phone.
- Pull the LCD frame towards you. You'll now be able to access five
screws which hold a metal plate in place. Unscrew these and lift away
the metal plate to access the connector from the LCD. The LCD will still
be attached to the phone at the bottom by a ribbon which attaches like a
plug and socket. Just lift this up to unplug it.
- You'll now have the LCD frame (and LCD) removed.
- The LCD will easily pop out of the frame and allow you to replace
it. Reverse the whole procedure for reassembly.
If you have any questions about Nokia 6500 Classic disassembly, email
rob.lee@formymobile.co.uk. The official service manual for this phone may also help you with further Nokia 6500 Classic disassembly. Click here for details
|
|
ABOUT
