If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=6234lcd
Tools required: Torx 6 screwdriver
- Remove the battery cover and battery and the two screws you see.
- You can now remove the front cover of the phone. Just lift it away
from the rest of the phone starting near the bottom. It's held on with
clips round the edges which should release with a little force.
- You should now have the front cover removed, like below. Remove the
four black screws you see.
- Now lift the part which holds the screen in place from left to
right. Note that the keypad part is still attached to the circuit board
by a ribbon, which attaches like a plug and socket. To unplug this
ribbon simply lift it up.
- Your phone should now look like below.
- Unclip the keypad part around the edges.
- With the keypad part removed your phone should look like below. Now
simply push the LCD screen out of it's frame. You'll have to bend the
frame slightly to get it out.
-
You should now have the LCD screen removed. Replace with new then
reverse the whole procedure for reassembly.
If you have any questions about Nokia 6234 disassembly, email
rob.lee@formymobile.co.uk.
Or contact us on Facebook for help with
further Nokia 6234 disassembly.
|
|
ABOUT
