If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=5310lcd
Tools required: Torx 6 screwdriver
- First remove the battery cover, battery and memory card.

- Run your fingernail around the edge of the join of the camera
surround and back cover to unclip it.

- With the camera surround removed your phone will now look like below. Now remove the
two screws you
can see.

- Now run your fingernail around the edge of the front cover to unclip
it. You'll now be able to see two more screws. Remove these.

- Now lift away the keypad. It'll come away without much force. Again,
you'll reveal two more screws you need to remove.

- Pull the back of the phone away from the main body of the phone.

- Your phone will now look like below.

- Turn the phone over. Unclip the two metal clips (circled in green)
and a ribbon (circled in red). The ribbon attaches like a plug and
socket. Simply lift it up to unplug it.

- A ribbon attaches the LCD to the PCB. Unplug this just like the
ribbon in the last stage. Now separate the phone into two parts again

- Your phone will now look like below.

- You can now remove the LCD and replace with new. Reverse the whole
procedure for reassembly.

If you have any questions about Nokia 5310 disassembly, email
rob.lee@formymobile.co.uk. The official service manual for this phone may also help you with further Nokia 5310 disassembly. Click here for details
|
|