If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=5000lcd
Tools required: Torx 5 screwdriver
- First remove the battery cover, battery and sim card. Remove the two
screws you see.
- Use something like a guitar plectrum or the edge of a credit card to
unclip the front cover.
- You should now have the cover and keypad removed, like below. Remove
the four screws you can see.
- Lift the main body of the phone away from the back cover. Lift from
right to left, like below.
- Your phone you now look like below. The LCD screen is attached to
the circuit board by a ribbon. This connects like a plug and socket.
Simply lift the connector (circled) up, away from the phone to unplug
it.
- Two metal clips on either side now hold the LCD frame to the circuit
board. Unclip these and lift the frame from left to right.
- Your phone should now look like below. You'll notice another ribbon
(circled) is still attached. To disconnect this ribbon, gently pull the
metal frame in the direction of the arrow and it'll slide out.
- Your phone should now look like below. The LCD screen is now easily
removed from the frame.
-
You can now replace the LCD. Reverse the whole procedure for reassembly.
If you have any questions about Nokia 5000 disassembly, email
rob.lee@formymobile.co.uk.
Or contact us on Facebook for help with
further Nokia 5000 disassembly.
|
|
ABOUT
