If you require a new screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=2600clcd
Tools required: Torx 5 screwdriver
- First remove the battery cover, battery and sim. Two clips hold the
front cover in place (circled) so release them.
- You should now have the front cover removed. Remove the screws you
can see.
- Flip the frame from left to right but take note that it is still
attached by a ribbon. The release this, flick the black latch (circled)
up then pull the metal frame away from the phone.
- The circuit board will still be attached at the bottom of the phone
so move it to one side slightly to access the ribbon connector from the
LCD screen. The connector attaches like a plug and socket. Lift the
connector up, away from the phone to unplug it. The LCD screen will now
be free.
- You should now have the LCD screen removed. Reverse the procedure for reassembly.
If you have any questions about Nokia 2600 Classic disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with Nokia 2600 Classic disassembly.
|
|
