If you require a replacement screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=1208lcd
Tools required for disassembly: Torx 6 screwdriver, plastic tool such as a guitar
plectrum or credit card.
- Remove your back cover, battery and sim card.
- Run something like a credit card around the join of the front cover
to release it.
- With the front cover removed your phone should look like
below. Remove the six screws you can see then lift the main body of the
phone from the housing.
- Your phone should now look like below. Two metal clips hold the LCD
and frame to the circuit board. Pull these clips back to release the
screen and frame.
- Turn the phone over and it should now look like below. The circled
connector needs to be disconnected. It attaches like a plug and socket.
Just lever it up
to unplug.
- Your phone should now look like below. Now simply push the LCD
screen out from the other side.
- You should now have the LCD screen removed. Reverse the whole procedure for reassembly.
If you have any questions about Nokia 1208 disassembly, email
rob.lee@formymobile.co.uk or contact us on Facebook for further help with
Nokia 1208 disassembly.
If you require a replacement screen, phone cover and screwdrivers, they can be purchased
here:
http://www.formymobile.co.uk/proddetail.php?prod=1208lcd
|
